6 Top Factors to Consider for a Solid Conservatory Roof

Glass roof conservatoryYou have been seeing adverts for solid conservatory roofs in the local paper, on billboards all over town and on the vans of local installers driving around your neighbourhood, but how can you know for sure if a solid roof conservatory is the right option for your house? And who should you hire to install one?

Below, we have compiled the top 5 factors you should consider when selecting an company to install a solid conservatory roof.

1. Do You Need a Solid Conservatory Roof for a Refurbishment or a Newly-built House?

The engineering and design that backs solid conservatory roofing systems mean that this type of roof is lightweight. It also means that it can be used to refurbish an old conservatory in addition to being used to construct a new tiled roof conservatory.

Some professionals in the industry and many homeowners refer to this as ‘retrofit.’ It allows old conservatories to be transformed that are too hot during the summer and too cold during the winter into an area that can be used all year long.

If you would like to have a new conservatory that has a solid roof, then you will need to find an installer who is able to do everything for the project, from building the walls and base to fitting the frames and then finally getting the solid roof installed.

2. Will You Need to Have New Doors and Windows Also?

When a new solid roof is installed it can really help to improve your conservatory’s energy efficiency. However, if the doors, windows, and frames are inefficient and old, you may not enjoy the full benefits that a new roof can provide. In this case it’s best to install new Solidor composite doors and new windows also. 

3. Building Regulations and Planning Permission for Conservatories

A majority of new-build conservatories that have either a glazed, tiled or solid roof do not require planning permission since they are covered under what is referred to as ‘permitted development.’ However, there are some conditions regarding size and placement. The Government’s Planning Portal has details on this.

Building Regulations apply when you are planning on building an extension on your house, but as long as certain conditions are met they do not apply to a conservatory. For a conservatory to be classified as a conservatory instead of an extension, it needs to be separate from your main home with external quality walls and/or doors and windows that meet the requirements of Building Regulation. It also will need to have its own independent heating system with separate temperature and on/off controls to the heating system in the main house.

If those measures are not met, then technically the conservatory is an extension which means that separate Building Regulations will be applicable. Even when you have a conservatory that is built in-line with those conditions, any electrical work, glazing, window, and doors will all need to meet specific Building Regulations.

4. Is the Workmanship of the Installer Certified?

You may be surprised to learn that not all building work that is conducted by contractors, installers and builders is actually certified. An installation company must register with a government approved, UKAS accredited certification scheme in order for this to be the case.

That is where ‘cowboy builder’ problems can occur and why the most reliable and trusted tradesmen with the best workmanship standards are the ones who decide to participate in a certification scheme.

5. What About Energy Efficiency and Insulation?

Insulation and the energy efficiency levels that result are among the most important questions that you need to ask your installer. One of the major reasons why most homeowners are interested in a conservatory refurbishment in the first place is due to their current one being inefficient, so this is definitely an important consideration.

Unlike doors and windows, conservatory roofs do not have a thermal rating system. Instead, the product brochure and your installer will probably discuss the U-Value of the roof.

The U-Value is a measurement of how effectively a material insulates. Thermal performance measures levels of heat loss and that is often called a U-Value. The lower that a U-Value is, the less heat is lost, so good thermal performance will have a low U-Value.

6. Can a New Roof Be Fitted on the Frames of Your Old Conservatory?

Yes, a new solid conservatory roof can be installed onto your old frames. The installer will conduct a survey and tell you whether or not they are well-suited to having a new solid conservatory roof installed on them.…

Making Your Kitchen Child Friendly

Introducing your children to how food is prepared and getting them involved in this from a young age will help them make healthier food choices later in life. Doing this will also help to prevent picky eating. Introducing your children to the kitchen will also help them build skills which benefit them in their adulthood. They will also have fond memories of the time spent together.

Before you start trying to get your children into the kitchen, you need to ensure that you have created a welcoming environment. The environment should also be safe so you can teach your children the wonders of food preparation, cooking and eating without any worries. If you ate unsure where to start with this, there are some tips that you can use.

Avoid Sharp Edges

The head of your young child will be at the same height as the kitchen cupboard handles and worktops. Young children also do not have full spatial awareness which means that bumps and cuts will happen often. A lot of modern kitchen designs have sleek edges and if you have young children you need to consider this. It is better to have a kitchen design with rounded edges instead.

You should also consider kitchen units that do not have handles. This will reduce the chance of bumps and the temptation to pull on the handle. Adding some magnetic locks to your lower units is also important and you should keep dangerous kitchen items out of reach.

Safe Hot Areas

There is no amount of childproofing that will make up for vigilance, but there are some steps that you need to take. This is particularly important when you look at the hot areas of your kitchen such as the hob and the boiling kettle. If possible, you should invest in an induction hob instead of a gas or electric one.

These hobs are designed to heat the pots and pans and not the actual hob. Once you have finished cooking on them, the hot area will return to a safe temperature much faster.

You might also install some glass splashbacks in your kitchen so that if you do cook with your little ones, there’s not so much mess to clean up afterwards!

Have A Childs Cupboard

While you need to make the kitchen child safe, you also need to provide your children with some space to explore and learn. This will help them take their first steps to enjoying cooking and food. One of the best solutions will be to have a cupboard that is just for them.

You will need to choose a low-level base unit for this as they are easier for children to access. The cupboard should then be equipped with food stuffs, safe utensils and safe equipment. Your child’s favourite plastic cups and bowls should be there so they can set their own place at the table.

Enjoy Yourself

If you want to ensure that your kitchen is a child friendly room, you need to be just as friendly when you are there with your children. When you take all the steps to make the kitchen safe, you are giving yourself the chance to enjoy your time in the kitchen with your children. When you are relaxed in the kitchen, it will have a long-term effect on your children and make them associate the room with good things.

Whether you are preparing food for the whole family together, playing or having a family meal, you need to make the kitchen the heart of your home. Making the room child safe will give you more time to spend with your children without any worries.…

Clean And Lean: Why Green Energy Is Such A Hot Topic

There are many ways to incorporate a greener philosophy into the operations of your home. Converting to green energy is one of them, and not only will it contribute to a better environment, it will save you money! Keep reading for some new and exciting ideas on how to make your home greener, today.

Wear natural fabrics during the summer in order to avoid wasting energy on air conditioning. Cotton and similar fabrics will draw moisture from your skin, so you will stay cool. Wear light colors; dark colors tend to make you feel warm and you will be likelier to turn on the air conditioner.

If you are interested in saving energy, utilize the warm summer months to help you dry your clothes. Forgo the use of your dryer, and hang your wet items out in the bright sunlight. Not only will you save energy, but your clothes will smell fresh and feel wonderful.

If you are planning to go greener, you should consider fixing any taps that are leaking. Doing this will decrease the amount of water you use, and as a result, you will have more hot water in your home. This can really help if you are struggling to have enough warm water in the shower.

If you are repairing or replacing your roof, and you have good sun exposure, look into having photovoltaic (PV) cells integrated into the roofing material. Modern PV cells are much less noticeable than older styles. If you don’t use all of the electric generated by your home, some utility companies will even let you feed it back into the system for credit against your bills.

For green energy use in your home, you should change all your incandescent bulbs to the new energy efficient fluorescent bulbs. Not only will you save a bundle on your energy bill, but you will help conserve energy for future generations and reduce your own impact on the power grid in your city.

If switching your home to solar power is beyond your financial capabilities, try switching just one room, like a bedroom, to solar power. There are solar kits available online that can help you green a room, and this will positively affect your energy bills and carbon footprint for years to come.

When shopping for new appliances, choose the ones where the energy star rating is in the most efficient range. Even if you cannot afford new appliances, you can choose new parts for your old appliances that are much more efficient and will help your old appliances save money and energy like new ones.

Go green on your coffee break by bringing your own cup. If you usually order a Tall Latte at Starbucks, bring a tall re-usable coffee mug with you. Every time you ask your favorite coffee shop to mix your drink in your own cup, you are helping to green your environment.

Going green offers so many advantages to the homeowner, it’s a wonder more people do not do it. Hopefully, you have garnered some very useful tips from this article on how you can bring greener sources of energy to the technology in your home. You will see an immediate positive impact on your wallet and the environment!…

2 Easy Ways To Identify Hydraulic Hose Fittings

Today, most industrial equipment relies on hydraulic systems to properly operate. These machines use adapters and fittings with a variety of thread forms and sealing methods. Unfortunately, all the thread forms look similar, so the different fittings are usually identified by the sealing method used. However, this can be difficult to do when equipment needs to be repaired. Consider the two easiest ways to determine which fitting you have.

1. Determine the Fitting Type

There are only two types of hydraulic Hose fittings Fort Worth TX: reusable and permanent. Reusable fittings are no longer commonly used because they are considered to be outdated technology. You can identify a reusable fitting because it is placed on a hose by using only a vise and a wrench. Reusable fittings typically cost more than permanent fittings as well.

Permanent fittings, also known as crimped hydraulic fittings, are the most popular in the fluid power market because they are easier to attach. However, to attach a permanent fitting, you will need crimping equipment or swaging tools.

2. Identify the Sealing Method

The most common hydraulic fittings you’ll find are mated angle, O-ring and threaded. The mated angle seat fittings have sealing threads that are either straight or parallel. The two mating angle seats form a seal with they are brought together.

There are several types of O-ring designs – boss, flange, seal – but they all have an O-ring seal that creates the closure.

The tapered fittings have either male or female threads. The female threads are on the inside, and the male threads are on the outside. Threading the two together applies pressure on the couplings, thus making a tight seal.

Keeping your industrial equipment running smoothly can be a big task. Being able to accurately and quickly identify which hydraulic hose fittings you need to replace can save time and money.…

3 Benefits of Pneumatic Motors

Pneumatic motors are also known as air motors, and they are used in a variety of applications like chemical, food, agricultural, and nuclear industries. They work well wen there is a lot of demand in the operating environment, but they also have several advantages. In addition to being able to repair and improve performance through things like the Gast air motor rebuild kit, these motors a smart investment in heavy-duty applications.

1. Safety

The best argument in favor of air motors is their advantage in the area of safety. These motors do not produce any sparks, and they don’t overheat. This greatly reduces the risk of fire or explosion in production or operation areas. They also have a reduced risk of jamming and are not sensitive to electromagnetic interference.

2. Flexibility

For pneumatic motors, flexibility allows them to operate in any positions and without a sophisticated control system. The torque can be easily varied, as well as the rotation speed, through simple tweaking. The air supply flow or pressure levels can be easily adjusted to affect output. They have a power-to-weight ratio that is almost 6 times higher than that of an electric motor, so you get the most out of a limited space application. The rotations can go in either direction, and they are resistant damage when rapid reversals occur. They still operate in extreme temperature as well.

3. Reliability

When an air motor stalls, it doesn’t deteriorate or heat up. It also won’t generate any current peaks when it is starting up. The supplied air expansion works to keep it continuously cool, which prevents the motor from overheating even when operating at high speeds.

Air motors allow you to increase your productivity. The installation and maintenance costs are reduced, leaving you time and money for other areas of operation. These motors can be effective alternatives to the hydraulic or electric motors on the market.…

Selecting a Supplier to Help Your Business Grow

No matter what kind of products or services you offer, you need to have a supplier that gets high quality supplies to you on time. You need your supplies to meet your quality requirements and your time constraints. Here are some tips that will help you whether you need a supplier of deaerators, machine parts or any type of equipment.

Decide What Is Important to You

While many things are necessary when working with a supplier, some are critical. Perhaps the supplier’s method of quality assurance is most important so that you are assured of getting the best and most efficient equipment. The length of time from your order to delivery may be the most important thing so that you can get your products to your customers. Delivery methods can impact you either positively or negatively. Being able to return defective pieces because satisfaction is guaranteed may be very important. And of course, payment terms are often one of the most critical factors in deciding on a supplier.

Ask for and Evaluate Bids

Once you know what you need, put your selection process criteria to work for you when calling for bids. If you have everything you need in the requirements you give out, you can compare the offers against your list to see which contractors best meet your criteria. If you’ve ranked your needs, you can decide whether or not each provider can meet them.

Make a Selection and Keep an Eye on Things

Once you have chosen a company to work with, keep communication lines open and monitor how your supplier is doing. If they meet your needs as promised, you are likely to stick with them and enjoy a mutually beneficial relationship. Otherwise, you can start the process again rather than renewing a contract that doesn’t meet your needs.…

Things to Consider When Moving Your Business

If you are planning on relocating your business, then you may be looking for how to begin the process. Here are some tips for making the transition as smooth and painless as possible.

Establish a Plan and a Timeline

The amount of detail and organization required for moving your business can be daunting. However, creating a step-by-step plan and a time frame through which the steps can be accomplished can definitely be beneficial. Include crucial information such as the moving budget, a list of contacts which covers everyone involved directly or indirectly with your business and delegate moving tasks depending on the size of the move.

Look Into Hiring Movers

Enlisting the help of a moving company may be a smart choice. The movers you choose are dependent on factors like budget and the type of business you operate. For instance, if you run a manufacturing plant, then do an internet search for “heavy equipment movers near me” to find companies that specialize in the transportation of machine parts. Once you find a company, provide them with all relevant information to help quickly facilitate the move.

Update Contact Information

Having the right address and phone number listed on popular search engines and business directories is essential. Be sure to change this information as soon as possible after you have completed the move. Customers will be able to easily find you at your new address, as well as service providers that provide electricity, internet and other amenities to keep your business running. If your business is well-known in the community, it can also be beneficial to make flyers to post around local boards and community centers to inform consumers.

Moving your business does not have to be a hassle. If you have a clear and structured plan for the changeover period, you are guaranteed to execute it with as little loss of time and money as possible.…

How Metal Injection Molding Can Work for You

Manufacturing complex metal parts can be difficult with most casting methods—creating the die is costly and the process requires a lot of fail-safes to ensure the liquid metal fills the mold and solidifies properly. Recent years have seen the rise of an alternative, though: metal injection molding (MIM), a form of powder metallurgy that promises high-quality products with lower costs. Many industries are turning to MIM as the answer to manufacturing challenges—why?

The Process

Metal injection molding is similar to other powder metallurgy processes, but it starts with a different feedstock composed of fine metal powder and a plastic/wax binding material. This feedstock is heated and injected into the mold, producing a metal and plastic “green” part. A multi-stage process removes the binder via thermal or chemical treatment, and the results are sintered to join the metal particles. After sintering, the products are about 95-98% as dense as the bulk metal, which may be further improved on.

Applications of MIM

Within the past few decades, the market for MIM parts has steadily grown and is projected to grow further. MIM parts are often small, complex and mass-produced components where dimensional specifications must be met with high accuracy; this includes extremely thin walls and fine details such as threading or identification marking. This includes application in electronics, firearms, medical equipment and the aerospace and automotive industries.

Why MIM?

MIM is limited to small feedstock injections, and the tools and molds are more expensive upfront. However, compared to competing methods, MIM is more economical overall for high-volume production of small metal parts with complex geometries, a niche that nonetheless has high demand—some components that can be produced through MIM are impossible to create otherwise. Sintering also works at about 90% of the material’s actual melting temperature, making it valuable for alloys with prohibitively high melting points. Additionally, little to no machining is required for the final product, saving considerably on material costs, and the injection process essentially combines multiple stages into one.…